Greenhouse garden ebb and flow ebb flow rolling benches with food
garde ABS
Product Description
The Greenhouse Rolling Benches maximises the use of available
greenhouse space.
With a Fixed Benches there is a set pathway around each Ebb and
Flow table.
With a Rolling Bench the Ebb and Flow table is able to shift left
or right using a series of rollers top of the support frame.
This means that tables can be stacked side by side with no gaps in
between and the grower separates them only when they need to get
access between a certain table.
This method allows a higher number of Ebb and Flow tables to be
fitted inside a certain growing area.
The use of Flexible feed and return lines on the valves allows the
tables to be moved left or right without putting strain on the
valves or irrigation system.
All Greenhouse Rolling Benches are custom designed to suit a
growers greenhouse area and are supplied with technical
installation drawings.
The advantages
1. Water tray: U.A. resistant, original ABS plastic cap over a 100%
recycled ABS plastic core; these trays are recyclable.
2. Hand wheel: Manual drive, It's convincing to move the top 60cm
from left to right. The utilize of greenhouse area is upon 50%.
3. The standard height is 75cm and can be adjust up and down 10cm.
4. Heavy-duty bench leg: Hot-dipped galvanized finished, The life
above 20 years.
5. Greenhouse Roling Benches border for the aluminum alloy, reduce
the weight for the frame. Easily to operate and move.
6. All plants are watered simultaneously and evenly providing
better plant growth
7. Crop growth cycle is typically reduced by 1 to 2 weeks
8. Retail areas remain clean and dry and clear of hoses
9. Dry floors and plant foliage make it easier to control relative
humidity
Specification
| Product | Greenhouse Rolling Benches |
| Sizes | 3x6ft, 4x8ft, 4x10ft, 5x10ft, 4x12ft, 5x12ft, Customizable |
| Tray Material | Food grade ABS plastic |
| Tray Thickness | 3mm |
| Frame | Aluminum alloy |
| UV Protective Ability |
Yes |
| Height of Table | 60~80cm |
Feature | 1) Manual drive, ease operation and movement. Greenhouse rolling
benches border for the aluminum alloy, the surface treatment of
steel pipe bracket portion and seed bed networks are hot dip
galvanizing, particularly suitable for hot and humid environment
greenhouse. 2) Plant Trellis Supports are manufactured with galvanized steel to
prevent rusting and corrosion. All greenhouse plant supports
consist of uprights that are attached to the grow bench side rails
and are connected by a rigid cross bar that has a thumb screw on
each upright post for easy height adjustment. 3) The range of Trimming is 300mm, the utilize of greenhouse area
is upon 80%. 4) Anti-tilt device prevent the problem of inclination caused by
emphasis. 5) UV Protective Ability. 6) Using life 10-15 years. |
FAQ
Q. Are the rolling bench can horizontal adjustment?
A: Yes, it can adjust 1-7cm.
Q. What's the weight load of greenhouse rolling bench?
A: Standard is 70-90kg, the weight load can be customized.
Q. What's the height of rolling bench and trays?
A: The standard height of rolling bench is 60-70cm, the inside
height of tray is 7cm, outside height is 9cm.
Q. How do I install the structure or is your company to help us
install it?
A: It is easy to install. We send install video or manual to you.
Or welcome visiting our factory. We will guide you how to install
it in our factory.
